It has the function of marking with original level. It uses laser lines to accurately project the work line on the work object, which makes the construction process more convenient, time-saving, labor-saving and can ensure the construction quality with.
Laser line projector is widely used in various construction units of construction projects, such as carpenters, bricklayers, painters, electricians, etc. The horizontal line can be drawn on the wall.
The vertical line can be drawn on the wall, and the cross line can be drawn to the ceiling. The laser point to the ground is precisely located by the machine. The machine is inclined for 3°and automatically leveled. Alarm function beyond the safe range.Magnetic damping compensation system ensures fast leveling time. The line can be divided into three gears: horizontal, vertical and cross.
The vertical line can extend. The laser point to the ground can be used for machine positioning (line 2 machine does not include the point to the ground). 6.360 degree rotatable base, equipped with fine adjustment structure, can make the machine quickly find the target. The working height of the machine can be adjusted arbitrarily with the tripod (with optional accessories). Insert the original battery into the battery slot, and pay attention to the direction during installation. Rough leveling can be achieved by adjusting the three legs on the rotating base to the top of the instrument with bubbles in the circle (it is not necessary to be very accurate). At this time, the instrument will automatically level. Tur on the right turm on power 1 lock switch, when the machine light is on, it means that it has been started. Operation according to the actual situation, press the V / H key (V represents vertical line, H represents horizontal line) on the top of the casing to achieve the light combination you need. If you want to accurately align a certain working position, you can manually rotate the machine with the fine adjustment knob to complete the fine adjustment. If you want to raise or lower the level, you can use the tripod (optional accessories) to adjust the high and low levels.In case of alarm, if the instrument is not leveled, the laser line will flash. At this time, only three foot legs need to be adjusted until the light does not flash. The inclined line will beep and alarm when the machine is tlted. At this time, put the machine flat and press the out key for about 3 seconds (hear a drop) when the machine is in a safe and flat state to turn on the inclined line function.
At this time, the tilted machine can operate normally without any alarm. If you need to tum off the direct left- -hand power switch, you can. When closing, just turm the locking switch back to the off state to automatically lock the instrument.
Of course, except for special circumstances such as severe weather, please wait patiently. From Germany via:GLS, DHL. Thank you for your attention to our products, and I wish you a beautiful day!
Feedback is the best support for our shop. We apologize for the late reply to the question during the holidays.We are a customer-centric company, and your feedback is very important to us, so please tell us what you think of our products.