Inspiritech 3 planes 360 degree Tile Laser Level kit, 3D Green Beam Self Leveling Cross Line Laser, Rechargeable Lazer Leveler Alignment Guide Tool with 2 Batteries and Remote Controller for Wall Tile, Floor Tile, Ceiling grid, base board, chair rail, picture frame, install baseboard and moldings. Floorers, Tilers, Electricians, Plumbers, Joiners etc.And DIY'ers, normal homeowner. For: Wall & floor tiling / electrical conduit & lighting / piping installations / kitchen & bedroom unit installations / bookshelf installation/refurbishment work / stud wall & partitioning & picture hanging/ home remodeling projects. It is an extra bright ALL GREEN beam multi-line laser level. Its a Universal Layout Laser level Tool providing 3 x 360 degree three planes of laser light for 3D full alignment. A horizontal plane and 2 vertical planes, 90 degrees apart, provide all the reference required for a wide variety of interior applications.
This includes wall layout and wall tile installation, acoustic ceiling installation (suspended ceilings), point transfer, custom cabinet and chair rail installation, flooring tile layout and horizontal and vertical alignment. The automatic self-levelling lazer leveler tool ensures ease of use. All laser lines are Green beam, independently switchable and it is site robust too.
Compared with the red laser beam, the brightnes of the green laser beam is 4 times that of the traditional red laser beam. The TDY01G-DS 360 cross line laser level has been designed with a tough housing and generous over mold to withstand the rigours of the professional construction and decoration environment. It is powered by rechargeable lithium-ion batteries that typically can provide a battery life of 3.5 hours, depending on the number of laser planes used.
The universal accessory allows mounting to ceiling grid, various sized tripods, columns and studs. The mount has fine vertical height and horizontal rotation adjustments for quick and easy setups. Combining accurate leveling and bright, green laser lines in a sleek, ergonomically designed body, this model is fast becoming a real "favourite" with the Construction Trades. All in all, its a very versatile & impressive laser layout tool.
All laser lines are Green beam, independently switchable. This Laser Tile level Tool providing three 360 degree planes of laser light. 1 horizontal and 2 vertical planes, 90 degrees apart, provide all the Level, square and plumb reference required for the floor, walls, and ceiling of the entire room. If you need to slope a straight line, but not level projected, turn off the self-leveling feature and use the levels at any angle on a tripod under Manual Mode. Laser at bottom(minimum vertical distance 6mm above the ground) helps floor tile leveling, square layout easier in horizontal level, Two vertical lines crossed at 90 degree to get a plumb line up and down allows you to get floor and ceiling squaring layout.
The vertical laser line is minimum 7mm close to the wall, 90°angle with horizontal line, easy for two walls tiling work at the same time. Laser projection cover ceiling, wall, floor. Slotted metal plate and magnetic wall bracket allow laser level to be fasten to wall, wood while using for Wall Tiling or Suspended Ceiling. 360 degree Rotary Fine tune base help to mounting laser leveler on Telescoping pole or place the line laser level at spots not otherwise reached by a tripod for wall or ceiling works and cabinet installation, when laying floor tile, scissor lift base works for fine tune horizontal line projection height range from 25-80 mm. Continuous use battery life is approx 3 hours with 3 beams, two pieces batteries will back you up for 7 hours in work.
The remote is super handy when you want to turn the light on/off without the risk of moving laser level, so user do not have to climb down & up ladder during Ceiling Tile work process. Brightness adjustable by remote control. 1 x 3D & 3 x 360° LASER LEVEL, 2 x 6000mAh Lithium batteries, 1x Remote control, 1x slotted metal plate, 1 x Magnetic wall bracket, 1x Fine turning Pivoting Base, 1x lifting base, 1X 5/8" to 1/4" adapter 1 x worldwide mains charger, 1 x English User manual, 1 x Luxury hard carrying case.
360° Green Beam TILE Laser Level. 1x 5/8" to 1/4" adapter. Net Weight: 1.33 lbs. Battery Type: Li-ion (Two Included).
Lines Accuracy:1/25In at 16ft. Cross Line Angle Accuracy: 90°±0.025°, ±1/25in/10ft. Smart Pendulum System that allows laser tool to self-level within 3 degrees while also indicating out-of-level condition by sound-light alarms for inclines of over 3 degrees to help ensure an accurate measurement.
When the alarm is on, the unit should be adjusted, making sure that it is placed on a level ground, then followed by the normal line emitting, which adopts the electronic induction principle. By pressing and holding the "OD" key for 3 seconds on either the control panel or the remote control, the self-leveling function will be deactivated and the pendulum will be locked, in this case the user can place the laser tool at any angle to project non-level straight lines without any indications.
INSPIRITECH Laser Tile level Tool providing 3 planes 360°laser light. This item is in the category "Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools".The seller is "happybird0723" and is located in this country: US. This item can be shipped worldwide.