Huepar 904DG Lines Green Laser Level Auto Self Leveling 360 Rotary Cross Measure

  

Huepar 904DG 16 Lines 4D Green Laser Level Specifications. Projection: 16 Green Laser Lines. Laser Class: Class 2 (IEC/EN60825-1/2014). Horizontal / Vertical Accuracy: ±3mm/10m;±1/9 In. Leveling / Compensation Range: 4°±1°.

50m with detector 132 Ft, ? Operating Time & Power Source: 8 hours with built-in Li-ion battery 3.7V / 1500mAh.

1 x Green Laser Level 904DG. 1 x Wall Hanging Plate. 1 x Magnetic Pivoting Base.

Short press H and V button on the keypad to switch the Horizontal and Vertical laser lines separately. The laser lines can be selected separately according to job requirements. The remote control enables to select three 360° laser lines individually at a distance up to 33Ft. The laser line(s) can be temporarily turned OFF by the remote control when you need to leave for a while. Self-leveling mode & Manual mode.

Once the pendulum unlocked, self-leveling mode is enabled. The laser beam will beep as well as the laser beam blink fast when the tool is out of self-leveling range ±4°. When the pendulum locked, the laser tool can be placed for use at any angle.

The laser beam will blink every 3-5 seconds to remind you it's not self-leveling now. Turn ON pulse mode: After power on & switch the pendulum to unlocked position, short press the V button to turn on the pulse mode. The indicator will light up in blue. Pulse mode extends the working range up to 200Ft.

In brighter working conditions when using with Huepar Line Laser Receiver. Keep the pulse mode on when using with a receiver. It is compatible with Huepar LR-6RG&LR-5RG Line Laser Receiver only.

Large-capacity li-ion battery: 6 hours of extra-long working & Can be charged with type-c port. Bare battery charging: with type-c port. Direct input charging: This laser tool can be used at job site with direct input charging even if take out the battery.

Charging protection help prevent the tool from overcharge.