The red beam has strong stability, low power consumption, and high-cost performance. The red beam is more suitable for indoor use. The scanning speed can be adjusted at 0? 600rpm, and the angle of scanning will continuously change as follows:0°? Electronic Horizontal self-leveling makes this rotary laser self-level up to 5° within 15s.
If the RL300HR gets disturbed on the job it relevels itself automatically. The self-leveling motors are accurate to ±10 seconds. Slight movements can be ignored in windy or other vibrating conditions while turning on vibrate mode. In vibrate mode, the self-leveling function is deactivated and the cross is locked to use the device at any angle. Electronic dual-slope function allows the user to perform a slope of 5 degrees in both X and Y axis. The slope of the Y-axis and the Slope of both X&Y-axis can be set by the remote control. This dual-slope mode works perfectly when checking grade, setting drainage, landscaping-terracing, or other slope work. This is a great laser tool for any job from DIY to large commercial construction, and everything in between.RL300HR rotary laser level adopts the finest industry materials and coated glass. Rugged design provides superior drop and outdoor weather protection resulting in reduced downtime. Equipped with a 7.4V/1.5mAh rechargeable lithium-ion battery with a type-c charging port and providing up to 20 hours of working time. The rotary laser system is suitable for construction, decoration, decoration, equipment installation, quality inspection, engineering supervision, and other perfect application in construction work.
Widely used indoor and outdoor applications; leveling, checking cut and fill, setting foundations and footings, concrete pours, etc. This Rotary Laser Kit includes 1xRL300HR rotary laser, 1x remote control, 1x red goggles, 1x Li-ion Battery with type-c charging port, 1x 5V2A adapter, 1x Charging Cable, 1x red target plate, 1x receiver with a clamp, 1x user manual, 1x hard-shell carrying case. Easy operation requires minimal training for quick setups and productivity. With advanced laser-level technology, Huepar has committed itself to providing solutions for varieties of applications of great accuracy and precision. Laser Class: Class 2 (IEC/EN60825-1/2014). Leveling Method: Electronic Leveling + Vibrate Mode (dual mode). Laser Wavelength: 635650nm(Rrd Beam). Remote control distance: Approximately 30M/98Ft. / 30M & Working Range(diameter): 2296Ft. Accuracy: ± 1/8 at 100Ft (± 3mm at 30m) & Self-leveling Range: ± 5°. Slope-adjusting Range: ± 5° (Bi-directional). Spinning Speed: 0, 300, 600RPM & Directional-scanning angle: 0°? Power Supply: Li-ion Battery 7.4V/1.5mAh & Operating Time: about 20 hours. Dimension: 96.5"x78.8"x69.7 / 245×200×177mm & Weight: 3.39lb/1.54kg. Working temperature: 0°C-- 50°C(-4°F-- 104°F). Self-leveling mode & Manual mode. After powering on, the self-leveling mode will be activated. The laser module will rotate at the speed of 600 rp. The indicator and beam(s) will blink together if the instrument is placed improperly, or the slope of the instrument exceeds the range (±5°).Please adjust the position or angle of the instrument. When using the self-leveling mode, please place this instrument on a level surface. Press the Manual Mode Button, you can place the laser tool at various angles to project non-level straight laser lines. Enter the manual mode, and choose whatever you want with our rotary laser. Rechargeable lithium-ion battery with type-c charging port and come with a 5V2A adapter super fast charging plug to save you time.
Hours of working time, enjoys lower energy consumption and a longer battery lifespan. The exterior working range can be up to 2296Ft. / 700M in diameter with a detector, accuracy of +/- 1/8 at 100Ft.
It is a great tool for large job sites. Equipped with a remote control for one-person operation, can be controlled within 98Ft. / 30M indoors or outdoors. Huepar red beam rotary laser with vibrate mode, it can keep the machine from being affected by slight vibration and continue to work normally.
Vibrate mode ignores slight movements in rugged working conditions. Electronic dual-slope function allows user to perform slope 5° in both X and Y axis. This dual-slope mode works perfectly when checking grade, setting drainage, landscaping-terracing or other slope work. Grading, excavating, and general construction projects are perfect applications for the RL300HR.We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address.
We try our very best to make sure every customer is completely satisfied. If there's a problem, message us! We're happy to help.