Kaiweets laser level offers all-in-one versatility laser beams for involving squaring, plumbing and leveling. 4 kind of laser beams are freely selectable independently, including. 360° Horizontal laser line with plumb spots. Vertical laser line with plumb spots.
Up & down plumb spots. Over-molded metal top laser window with IP54 water/dust resistance ensures your work well in construction site or wet condition. The laser line also offers 1/4"-20 and 5/8"-11 mounting threads to suit different tripods. Included portable carry bag that easy to clean, comes with compartments inside for the device & each accessiores, safe to storage, shockproof, scratch.
Do not stare into the laser beam, It may effect your eyesight. Due to the battery was made of lithium, Please keep it away from high temperature, fire, chemistry conditions. Working area (diameter), up to approx. Tripod mount: 1/4 "and 5/8". Working area with receiver (diameter), up to approx.Leveling accuracy: ± 0.3 mm / m. Self Leveling range, typical: ± 4º.
Leveling time, typical: =3 s. Operating temperature: -10 ºC - +50 ºC. Storage temperature: -25ºC - +75ºC.
Press and hold the "laser" key over 3 seconds to switch on manual mode. The left indicator lights up and blinks when the manual mode switch on.Switch to the unlocked position, self-leveling mode turns on. The laser beam will blink continuously when the device beyonds self-leveling range (±4°). After power ON, short press "double triangle" button to switch ON/OFF pulse mode. Extends the working range up to 197ft/60m in bright working conditions when using with Receiver LR100G. KT360B laser line comes with high capacity 7800 mAh batteries. The working time after batteries full charge: approx.
Third press "laser" key to open plumb spots. Working time: 90h (work with 1lithium batteries). Suit for chandelier, spotlight install. Adjustable Rod: It's a useful te. Lescopic rod that can be easily placed at any height between the floor and ceiling.Including 4 telescopic rods and 1 tail rod can telescope out 3.7m/12.18ft. Max height is 3.7m/12.18ft. The graduations are marked in black on the yellow pole in inches and millimeters. Fine-tuning Bracket: Mounting Bracket with 1/4"-20 Mounting Thread and 5/8"-11 Thread Adapter to accommodate standard nuts on with most line a. Nd rotary lasers, Sports camera, Projector, DSLR camera, Photography lights, Video game consoles. The bracket can be placed at any height of the rod according to your needs. With a height fine-tuning knob can be adjusted within 7cm. Sturdy Tripod Base: The tripod is made of standard aluminum with heavy-duty, plastic joints and ribbed, rubber feet. You can adjust the height from 0.48m-0.84m. While a screw clamp on the tripod side of the head stabilizes the pole so that it won't shift. Additionally, there is a small bubble level embedded in the head to can help you adjust the angle and accuracy to provide maximum results. Spring-Loaded Base: Laser Mounting Pole features a spring-loaded base for a quick and easy tension setup.
5cm powerful spring provides a greater adjustable range and a more stable fixed requirement. The foot and head plate have a non-slip surface, and the larger force area strengthens the fixing of the end both of the foot and head. Perfect Accessory Kit: The kit comes complete with 4 x Telescopic Rod Section, 1 x Tail Rod (with Spring-Loaded Base), 1 x Top Ceiling Skid Plate, 1 x Bracket (with 1/4"-20 Thread), 1 x 5/8"-11 Screw Adapter, 1 x Tripod, 1 x Carry Bag. A reinforced carrying strap makes it easy to transport all items from one job site to the next. Don't point the laser directly into the eyes.
KAIWEETS KT100P Durable Telescoping Pole Thicker and stronger aluminum leg tubes further enhance stability on a wide variety of surfaces. The built-in tight thread makes each section of the telescopic rods tightly connected.
Rod Sections: 4 telescopic rod + 1 Tail rod. Connection interface between rods: 5/8. Height of rod section: 60cm/23.62. Height of arbitrary telescopic rod: 0-52cm /0-20.87. Max height after fully assembled: 3.7m / 12.18ft.Tripod height: 48-84cm / 18.90-33.07. Bracket Mount Size:1/4"-20 & 5/8"-11. The length of the male thread to the side of the bracket: 11.5-6.5cm / 4.53-2.56. Bracket Height Fine-tuning Range: 7cm / 2.76. Material: Aluminum with a polyurethane coating. Gross Weight: 3.02kg / 6.66lb.
Storage length: 80cm / 31.5. 4 x Telescopic Rod Section. 1 x Tail Rod (with Spring-Loaded Base, Arbitrary Telescopic Rod Section, and Floor Skid Face). 1 x Top Ceiling Skid Plate. 1 x Height Adjustable Bracket (with 1/4-20 Male Thread).1 x 5/8-11 Screw Adapter. 1 x Adjustable Stable Tripod. 1 x Soft Carry Bag. 30 x 6.93 x 6.38 inches.
This item is in the category "Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Laser Measuring Tools". The seller is "sanqian885" and is located in this country: US. This item can be shipped to United States.